Cutting department

Cutting department

The cutting department is managed by one operator.
It is equipped with a Rush 280A double column CNC band saw with an 8 m roller unit, that can cut round/square and plate shapes to a maximum size of 280 mm.

It is also equipped with a next-generation AMADA HFA 400W saw capable of cutting up to Ø420 mm. Equipped with the most advanced technologies, it is fitted with patented WIDIA blades which reduce cutting time in half.

The CNC has serial cutting programs that can streamline clamp opening and closing times. Moreover, thanks to specially designed clamps, it can carry out multi-bar cuts, thus considerably reducing cutting times.

We are also equipped with two manual band saws, with a maximum cutting capacity of 250 mm and tilted cuts up to 60°.

PROCESSED MATERIALS

• Case-hardening steels EN 10084 UNI 7846: E.g. 18 NiCrMo5
• Steels for quenching and tempering

• Carbon EN 10083-2 UNI 7845 : E.g. C 40 – C45
• Alloys EN 10083-3 UNI 7845 : E.g. 39 NiCrMo3 (H/HL/HH)– 42 CrMo4
• ASTM :E.G. A 105(ASTM A105) – LF2(ASTM A350)

• Nitriding steels UNI 8077 : E.g. 41CrAlMo7
• Bearings steel UNI 3097 ISO 683 – 17 : E.g. 100 Cr6
• Unalloyed steels UNI EN 10025 : E.g. Fe 360 – Fe 430 – Fe 510
• Stainless steels:

• Austenitic steels UNI EN 10088 : AISI 304 – AISI 316
• Austenitic-ferritic stainless steel (Duplex – dual-phase) UNI EN 10088 : E.g. AISI 329
• Steels hardened by precipitation UNI EN 10088 : E.G. PH(Precipitation Hardening)
• Martensitic steels UNI EN 10088 : E.G. AISI 420 – AISI 431 – AISI 440C
• Ferritic steels UNI EN 10088 : E.g. AISI 430

• Cast iron UNI EN 1561 / 1563 : G 25 – GS 400 – GS 500 – 7
• Bronze UNI 1698 UNI 7013 : E.g. B14 – G Cu Sn 12
• Bronze aluminium UNI 5275 : E.g. G Cu Al 11 Fe4 Ni4
• Brass: OT 58
• Aluminium: Anticorodal Alloy 6082 State T6 – Ergal alloy 7075
• Pipes: E.g. Fe 360-430-510 – OVAKO 280 T – AISI 304 – AISI 316 – C45
• Melts: Cast-iron – Aluminium – Stainless steel
• Parts cut with PLASMA – OXY-CUTTING – LASER PROCEDURES